Mason Fasteners

Mason Fasteners  27 items.

A Self-Tapping Screw is a screw that can tap its pre-drilled hole as it is driven into the material.
A Self Drilling Screw in addition to the tap-like flute in the leading threads, there is also a preliminary drill-like fluted tip that looks much like the tip of a center drill.
A Rivet is a permanent mechanical fastener. Before being installed, a...

A Self-Tapping Screw is a screw that can tap its pre-drilled hole as it is driven into the material.
A Self Drilling Screw in addition to the tap-like flute in the leading threads, there is also a preliminary drill-like fluted tip that looks much like the tip of a center drill.
A Rivet is a permanent mechanical fastener. Before being installed, a rivet consists of a smooth cylindrical shaft with a head on one end.
A Bolt for the assembly of two unthreaded components, with the aid of a Nut.
A Washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener.


More
per page
Carbon Steel Self Drilling Screws for general fastening in metal. Ruspert Sliver Coating - exceeds AS 3566 Class 3.Drilling capacities (Drill Point: 3) in steel up to 6 mm thick Sizes available in 8g, 10g , 12g and 14g
$0.00
Zinc Plated corrosion resistant carbon steel screws with countersunk cross head. Designed for fixing plasterboard to  associated framing less than 0.7mm thick or to timber supports.
$0.00
A self-tapping screw is a screw that can tap its own hole as it is driven into the material.Available in Hexangonal Socket, Pan Philips, Countersunk Philips head.
$0.00
A rivet is a permanent mechanical fastener. Because there is effectively a head on each end of an installed rivet, it can support tension loads (loads parallel to the axis of the shaft); however, it is much more capable of supporting shear loads (loads perpendicular to the axis of the shaft). Bolts and screws are better suited for tension applications.
$0.00
A NutSert is a one-piece internally threaded and counterbored tubular rivet that can be anchored entirely from one side.
$0.00
DIN914Cone Point - Hex Socket Set Screws
$0.00
Countersunk head Hex Socket Head Screw Head: Socket Head Available in Galvanised Carbon Steel, Stainless Steel A2 and Stainless Steel A4.
$0.00
Available in Galvanised Carbon Steel, Stainless Steel A2 and Stainless Steel A4.
$0.00
Available in Galvanised Carbon Steel, Stainless Steel A2 and Stainless Steel A4.
$0.00
Available in Galvanised Carbon Steel, Stainless Steel A2 and Stainless Steel A4.
$0.00
Fastening timber and thin steel thicknesses up to 0.75mm.
$0.00
Available in Galvanised Carbon Steel, Stainless Steel A2 and Stainless Steel A4.
$0.00
Showing 1 - 12 of 27 items