Resources

MASON Sleeve Anchors

  • Light to medium duty applications
  • Fully assembled and ready to fix

 

 

Setting Procedures

Drill a hole of required diameter and depth.

 

Clean the drilled hole.

 

Drive anchor into the drilled hole.

 

Apply the required installation torque.

 

Selection Chart

 

Setting Parameters

 

Basic Loading Data for Single Anchor in Concrete

  • Non-cracked concrete C20/25, = 25N/mm2
  • Correct setting
  • No spacing and edge distance influence

 

Tensile Resistance

 

Shear Resistance

 

Basic Loading Data for Single Anchor in Solid & Hollow Masonry Base Materials

  • Brick strength DIN 105/ EN771-1
  • Correct setting
  • No spacing and edge distance influence

 

Recommended Loads

     

    Influence of Anchor Spacing,

     

    Influence of Edge Distance,

     

    Influence of anchoring spacing and edge distance for concrete edge resistance

    Formula for single-anchor fastening influenced only by edge

    For single anchor

    Formula for two-anchor fastening valid for S<3c

    General formula for n-anchor fastening (edge plus n-1 spacing) only valid where to are all < 3c and >1.5c

     

    Note: It is assumed that only the row of anchors closed to the free concrete edge carries the centric shear load.

    For 2 anchors