News

2020

Mikado Inserts

These are cast-in / precast inserts used for anchoring/ mounting fixtures to the concrete member of the structure. The fixtures include: ceiling lights mechanical and electrical fixtures and fittings air conditioning facilities, water supply and sewerage systems sprinkler systems and machinery The inserts are installed on the plywood formwork, or on top of the metal […]

Bend and Tensile Pull Out Test of the Mason Threaded Arc Stud

Mason Threaded Arc Stud are recommended for fastening applications where threads are needed for the full fastener length. Mason Threaded Arc Stud are available in thread diameters of M6 through M24. Mason Threaded Arc Stud have a short length of pitch diameter weld base. Most of this length is melted off during the stud welding […]

NAKA Luminous Stair Nosing – NUS Lecture Theater

High-brightness luminous lines integrated into the anti-slip stair nosing. This ensures that there is a certain level of luminescence for people to evacuate safely in case of a blackout due to a disaster.  

Installation of Architectural Finishing – Stainless Steel Tactile Indicators

The Technical Team at Fasten Enterprises specialize in the Installation Stainless Steel Tactile Indicators into various base material. With a wide range of coring machines, drills, drill bits, fasteners and concrete anchors, we are able to install Stainless Steel Tactile Indicators with ease.   We

NELSON Stud Welding Equipment for Rental

With over 20 years’ experience in Stud Welding, FASTEN ENTERPRISES is undoubtedly Singapore’s leading Stud Welding Expert. FASTEN ENTERPRISES provides full rental services of reputable and reliable Stud Welding Equipment  from NELSON Stud Welding USA and Power Generator for fixing of shear connectors onto I-Beam, including welding through metal deck to I-Beam.   We carry a diverse […]

Fasten Enterprises – Singapore’s Leading Shear Stud Expert

The technology behind of Stud Welding is based on the Shear Stud and the Stud Welding Equipment. At Fasten Enterprises, we provide the MASON Shear Stud which is a BC1:2012 Class 1 Material with FPC Certification and Stud Welding Equipment from NELSON Stud Welding (USA). With over 20 years’ experience in stud welding operations, FASTEN […]

On Site Demonstration and Pull Out Test of MASON MCA-PE3

Mason MCA-PE3 Pure Epoxy Chemical Anchor (MADE IN GERMANY). The Mason MCA-PE3 is a 1: 1 epoxy & hardener ratio Pure Epoxy Chemical Anchor. The pure epoxy technology is the advanced high performance chemical anchoring technology with an outstanding chemical resistance and industrial strength. Good compound properties achieve outstanding load values, always giving professional solution […]

Mikado Inserts casted into Post-Tensioned Slab

These are cast-in / precast inserts used for anchoring/ mounting fixtures to the concrete member of the structure. The fixtures include: ceiling lights mechanical and electrical fixtures and fittings air conditioning facilities, water supply and sewerage systems sprinkler systems and machinery The inserts are installed on the plywood formwork, or on top of the metal […]

NAKA Anti-Bacterial Kick Plate and Push Plate for Doors

All of NAKA Anti-Bacterial Door and Wall Protection (Kick Plates) uses anti-mould and bacteria-resistant compound resin. The bacterial resistance lasts semi-permanently.  

NAKA Anti-Bacterial Hand Rail Installed in an Upcoming Nursing Home in Singapore

Neowood is railing of a new materials that surpasses the properties of wood while retaining its warmth. Top rail of ultrafine particle wood powder (wood powder) compound resin. Vinilane is dual moulding with semihard resin eliminates sticky sensation. Grawood and Grahan are superbly weather-resistant railing for outdoor use. One-tenth of the heat conductivity ratio of […]

NAKA Luminous Stair Nosing – NTU Lecture Theater

High-brightness luminous lines integrated into the anti-slip stair nosing. This ensures that there is a certain level of luminescence for people to evacuate safely in case of a blackout due to a disaster.  

NAKA Stair Nosing – Paya Lebar Quarters

Standard stair nosing with a Carborundum insert to prevent fall accidents on stairs.  

MASON Formwork Accessories Site Photos

The reliable formwork accessories for all your construction needs. MASON Formwork Accessories come with test report from either 3rd Party or MASON in-house test reports. For more information, please contact office@fasten.com.sg  

Kurimoto Winding Pipe – Precast

Kurimoto Winding Pipe Installation for a Project in Jurong Island   Good adaptability to concrete Not necessary to remove after casting Spiral and Ribs reinforce its tubular body to reduce its wall thickness. Inner surface of pipe and concrete strongly bond with strong adhesion force that offers high resistance to loads. Easy to install: It […]